![]() I managed to get v8.4.2.9 working on my MBP Core 2 Duo running Mountain Lion and connected via USB. If this happens, you can either turn off drop shadows or switch the display to either 256 colors or millions of colors and the distortion will not occur. With some video cards set to display thousands of colors, you may notice that label shadows are distorted or have the wrong colors. Printers connected to a serial port or using a Serial-to-USB adapter are NOT supported. The LabelWriter 300, 330, and 330 Turbo printers mentioned in the list above are only supported when connected through a USB port on your Mac computer. To use a Dymo LabelWriter with PC Software, please make sure you have the correct printer driver installed.DYMO Labelwriter for the dedicated Dymo label and tape maker machines, supports the following printer models: Right-click on the Dymo LabelWriter icon and select "Remove Device" or "Delete".Open the Windows Start Menu and select "Devices and Printers", "Printers", or "Printers and Faxes".Unplug the USB cable from your printer.If the Dymo LabelWriter is already installed on your computer, but is not working with PC Software: Plug the USB cable back in to your printer.Then click "Yes" or "OK" to delete the driver. ![]() ![]() Follow the on-screen instructions as your computer reinstalls the printer.Īfter the driver is installed, the compatible Dymo labels will become available the next time you log in to our PC Software.A driver installation window should automatically open. The label spool is sitting loose in the printer.If your Dymo LabelWriter is feeding multiple labels with each print, there are two reasons why this may be occurring: To correct this problem, re-seat the label spool in the printer by following this guide. A dirty optical sensor in the printer.To re-seat the label spool in the printer, follow this guide. If your Dymo LabelWriter is printing blurry, smudged or faded images on your labels, this is usually caused by a dirty roller or print head. The Cleaning Card and its instructions are included with your printer. To use a Dymo LabelWriter on your Windows computer, please make sure you have the correct printer driver installed. When your Dymo Printer is first connected, the printer driver installation window will automatically open. ![]() Follow the on-screen instructions as your computer installs the printer. If the Dymo LabelWriter is already installed on your computer, but does not work with our software:Īfter the drivers are installed, the compatible Dymo labels will become available the next time you log into our software. If your Dymo LabelWriter is printing labels offset, this is usually caused by the label spool sitting loose in the printer. To re-seat the label spool, follow this guide. The label spool sitting loose in the printer.To re-seat the label spool, follow this guide. If your Dymo LabelWriter is printing blurry, smudged or faded images on your labels, this is usually caused by a dirty roller or printed head. Feed the LabelWriter Cleaning Card through the printer 2 to 3 times. ![]() The Cleaning Card and its instructions are included with your printer.Good news, you can currently transition to NetStamps and still use Xytek’s original approved 30915 compatible labels. If you still have some of our stamp labels to use up, you will need a Serial Number, before switching over to NetStamps. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |